Hello, welcome to Jinan Huawei CNC machinery CO., Ltd

National Advisory Service Hotline

Advanced Search:


Contact us


contact us

Contacts:JI Manager

Unified hotline:400-6587-688

Tel: (86)531-88276988

Fax:(86)531-88276988

Phone number:0086-15269186223

Address: No.18 Tonghua Road ,

Licheng district , Jinan city, 
shandong province, China



technical support

Operation process of advertising engraving machine

Source: Time:2024-03-18 09:15:43 views:

The operation process of the advertising engraving machine is as follows: 1. Connect the power to ensure that the machine displays normally. Turn on the host switch and start the control system (computer or controller)

The operation process of the advertising engraving machine is as follows:

1. Connect the power supply to ensure that the machine displays normally. Turn on the host switch and start the control system (computer or controller). Select appropriate control methods according to processing needs; Adjusting the cutting speed in manual mode yields better results. 2. Place the required carving materials in the middle of a fixed work platform according to the design drawings, ensuring that the dimensional deviation in all directions is not too large. Install and calibrate the cutting tools, and perform color separation on the engraving, setting the font size and pattern. 4. Create a new project file and import the completed pattern into it for printing and output; 5. Connect the computer to the spindle motor for online transmission, and then scale the newly made image proportionally to the desired length or complete the manuscript production (note: for high-precision control, graphic software is generally used). 6. Turn on the rotator (usually with two or more synchronous pulleys) for simultaneous movement on both sides and adjust the hand leveling water appropriately to compensate for the errors generated during the automatic wire feeding process and ensure smooth and flat cutting. 7. Enter the next step of wax etching process; 8. Direct inkjet printing for material cutting and forming. (This method is fast and effective, especially suitable for the production of small quantities of live parts). 9 If you finish a sheet and do not continue to make the next one, be sure to turn off the main power on the electrical box to avoid damaging the laser tube and electrical components. Attention should be paid to safety issues: all electrical components have potential hazards such as high voltage current and injury. Caution should be exercised when starting up and heating up. The air supply should be turned off first, and then the demagnetization should be cut off to prevent high temperature and burning at the charging point. For some thick steel plates or complex graphic engraving and milling samples, they should be slowly transported by air and driven in sections of several millimeters to tens of centimeters to observe the limit and prevent collisions, thus avoiding the possibility of serious damage to the equipment. When performing complex high-precision graphic trajectory calculations, one must be very careful and avoid omissions, errors, or impulsive actions, as any mistakes can lead to the entire work being scrapped and all previous efforts being in vain! In addition, when using a small straight saw, it is recommended to follow the corresponding operating procedures for the red light power series and not neglect the possible consequences it may bring! In practical operation, it is necessary to flexibly grasp and make appropriate adjustments and preparations according to the actual situation based on one's own model in order to achieve the desired effect! In general, it is necessary to practice and familiarize oneself with the performance characteristics of the equipment, and strictly follow the requirements of the manual to perform correct operation and management to ensure the safety of one's own and others' lives and property is not damaged!.

Attention: The shutdown sequence of different control systems varies depending on the model. Generally, the speed should be reduced first, and then the AC power supply should be cut off and locked. In special circumstances such as sudden malfunction and inability to power on the machine, emergency power-off measures need to be taken by pressing the red button on the emergency stop button. At this time, the contact of the contactor will close, preventing further power supply to the circuit and stopping the operation of the machine tool to avoid causing greater losses or even causing fire accidents and endangering personal injury. Generally speaking, these basic knowledge of electricity usage should be possessed and strictly followed, and cannot be ignored! In summary, it is necessary to better control large multifunctional CNC mechanical equipment and unleash its value to create more profit and benefits for your career!

keys: