The operation process of the laser cutting machine is as follows:

After equipment installation and debugging, perform idle operation. Confirm that the machine can operate normally without any abnormalities before starting to use it. 2. Connect the power supply and materials and fix them in place. 3. Adjust the parameters according to the processing requirements and test to verify the effect. Pay attention to the adjustment of focal length (whether it is clear), as well as the size and shape of the light spot (whether it meets the requirements). 4. Adjust the data information in the graphic editor according to the design drawings to carry out drawing work (guidance from personnel can be sought). 5. Place the material files that need to be cut in place (paying attention to surface flatness), and then import the CAD drawing into the tool template through the control system to determine the coordinate origin and other information. After setting it up, the system can be started to automatically cut and complete the engraving and milling task; 6. During continuous work, it is necessary to take breaks at intervals to avoid overheating and affecting the heat dissipation environment; 7. It is to do a good job in cleaning and maintenance, ensuring that the equipment is clean and tidy to prevent impurities from affecting subsequent operations. Overall, the specific steps in practical applications may vary depending on the device and specific situation. If there are special circumstances, please seek the help and advice of technical personnel..